INTENDED USES

For application to a wide variety of substrates including hand prepared rusty steel, abrasive blast cleaned and hydroblasted steel, and a wide range of intact, aged coatings. Provides excellent anti-corrosive protection in industrial, coastal structures, pulp and paper plants, bridges and offshore environments in both atmospheric exposure and immersion service. Certified to NSF/ANSI Standard 61 (NSF Certification is for tanks greater than 100 gallons (378.5 litres).

PRACTICAL INFORMATION FOR INTERSEAL 670HS

Colour - Available in a wide range of colors including Aluminum

Gloss Level - Semi-gloss (Aluminum is eggshell)

Volume Solids -  82% ± 3% (depends on color)

Typical Thickness - 4-10 mils (100-250 microns) dry equivalent to 4.9-12.2 mils (122-305 microns) wet

Theoretical Coverage - 263 sq.ft/US gallon at 5 mils d.f.t and stated volume solids  6.56 m2/litre at 125 microns d.f.t and stated volume solids

Practical Coverage - Allow appropriate loss factors

Method of Application - Airless spray, Air spray, Brush, Roller

Drying Times - 7 hours at 15°c touch dry, 26 hours at 15°c hard dry