In many situations blast cleaning is not cost effective or practical, and though Ferrozinc is not an equivalent alternative to shot blasting, it does offer a far superior performance than conventional coatings applied to slightly rusted surfaces.

 Ferrozinc is used after simple wire brushing to remove surface rust.

A dramatic colour change from white to black will show that the rust has been effectively neutralised.

 Ferrozinc should then be overcoated with a suitable primer & topcoat system for prolonged corrosion resistance. Salt spray and extended durability testing has proven FERROZINC to out-perform competitive rust conversion materials.

For use on ferrous metals only. Not designed for use on non-ferrous metals (aluminium, copper, & stainless steel etc).

Technical Properties

Coverage

20 square metres per litre @ 15 microns dft

Flashpoint

X °C

Storage

Store between 5°C - 25°C. When not in use, cans must be kept sealed

Shelf Life

12 months from delivery date in original sealed containers

Additional Technical Information

For use on ferrous metals only. Not designed for use on non-ferrous metals (aluminium, copper, & stainless steel etc).

Maximum VOC Content

0.03 Kg/l

Regulations

Not Applicable

Colour Range

N/A

Cleaning

Surfaces should be wire brushed to remove loose rust. Soluble salts should be removed by washing with water, as they may slow down the conversion process. FERROZINC should not be used over oil/grease contamination, or existing paint as this will render the product ineffective.