Adhesion-promoting primer on on smooth, sound/stable substrates, e.g. gypsum plasterboards, concrete, as well as slightly absorbent mineral renders CSI - CSIII according to DIN EN 998-1, gypsum and ready-mixed renders PIV according to DIN EN 13279-1 and gypsum building boards. Especially on gypsum boards, a risk of spalling of thin gypsum putty layers is significantly reduced. As a priming coat with good grip before wallpapering of all kinds on smooth, slightly absorbent substrates.

Material Properties

• Silicifiable for following coats with dispersion silicate paints
• Emission-minimised, solvent-free, unplasticized
• Grip priming coat especially on thin gypsum filler
• Extends the open time for subsequent coats
• Free of preservative
• Suitable for allergy sufferers "Deutsche Haut- und Allergikerhilfe E.V." (German Skin and Allergy Aid Association)
• Adhesion-promoting on slightly absorbent substrates

Material Base / Vehicle

Storage

Keep in a cool, but frost-free place.

Maximum particle (grit) size

Density

Diffusion-equivalent air layer thickness s_dH₂O

Water permeability (w-value)

Suitability according to Technical Information No. 606 Definition of Application Areas