Call (01582) 258258 | Mon - Fri 8.00am - 5.00pm

Anker Stuy

Anker Stuy 17-0870 Ankocryl Interior Topcoat S Flat Matt mixed to colour

Anker Stuy 17-0870 Ankocryl Interior Topcoat S Flat Matt mixed to colour

Stock Status: In Stock
Waterborne 2-5% Flat Matt Topcoat with great flow.


Anker Stuy Ankocryl Interior PU Topcoat line is based on a blend of self crosslinking acrylic and polyurethane dispersions. This blend has been chosen to allow for the optimum balance of properties like chemical resistance, scratch resistance as well as resistance to impact and blocking. 

A single component interior waterbased topcoat with a natural (dead) flat matt finish (2-5% Sheen); fantastic scratch, abrasion and stain resistance that rivals a two-component interior topcoat. This product is design for  all interior wooden elements.

The self crosslinking mechanism present raises the properties of the coating to a level of a two pack coating. This is due to the fact that the self crosslinking mechanism is initiating a chemical reaction after evaporation of the water. In that way it is in fact a reactive coating without the downsides of a real 2 pack system like limited potlife and need to mix the paint with hardener prior to use.

Furthermore the latest available technology for pigment dispersion is used to give the best chemical resistance against known aggressive household chemicals like coffee, red wine and alcohol in both dark, pastel and white shades.

Use as a spray paint for finishing wood and woody substrates already primed in interior applications.

  • Fast drying.
  • Waterbased product
  • Suitable for all commonly used Timber species and MDF
  • Good block resistance
  • Superb flow
  • Great scratch and abrasion resistant properties
  • Dead flat Matt Finish 2-5%
  • Non-yellowing
  • Good resistance to household chemicals and skin fat
  • Application can be by conventional, airless and many other methods.
  • Easy to apply
  • Not suitable for exterior use
Product code  17-0870
Dust dry approx. 1 hour
Re-coatable approx. 3-4 hours
Substrates Best results are achieved on fine (320 to 400 grit) sanded substrates. When applying on previously applied paint layers, we advise to clean and degrease these well and then sand them. If in doubt about adherence to substrate, test the substrate beforehand.
Maximum humidity Between 25 en 75%
Minimum application temperature 15°C
Application Equipment Airless or Airmix spraying
Sheen 2-5%

Suggested Thinner - (Supplied Ready for use, add no more than 10% water if required)

Technical Data Sheet - Anker Stuy 17-0870 PU Topcoat TDS
Material Safety Data Sheet - Please contact us for details

product review overlay image

Customer reviews

No reviews left yet
Write A Review

No reviews have been left for this product, be the first to leave a review
  • MPN:
  • Brand:
    Anker Stuy
  • Condition:
  • Product Code:
  • Weight: